Rebel Technology Alchemist Programmable Effects Unit and Minisynth

Full Description

Any Effect, Whenever You Need It

Swap out effects from the OWL effects library. The Alchemist allows you load up patches from the library onto the hardware to add to your signal effects chain. Delay, reverb, compression, and anything else you might need. All can be used by uploading them up to the Rebel Technology Alchemist.

Small but Powerful Synthesis

Upload your own synth patches to the Alchemist to create new and exciting sounds. Add unique sounds to your signal chain, loads can be found in the OWL library provided by Rebel Technology. Make your own to really help your synthesizer set-up stand out from the rest.

Fully Programmable

The Alchemist is fully Programmable meaning that you can add to it any patch that you like. Not only this but you can make your own. Program your own patches - synthesizer or effects - and upload them to the Alchemist. Supported languages include Max Gen, Pure Data, FAUST and C++ meaning there is a lot of scope for expanding the Alchemist out of the box.

Features

• 4x assignable knobs
• 2x assignable buttons
• 1x mode button
• 1x CV in
• 1x trigger in
• RGB led
• USB MIDI Device
• 3.5mm stereo in and out
• 24bit 48kHz audio
• Runs all OWL patches
• 9v DC or USB powered

Specifications

• Audio Resolution: 48kHz 24-bit stereo audio
• DSP: 32-bit floating point DSP
• Processor: Powerful ARM Cortex M4 processor
• RAM: 8 Megabyte RAM
• Latency: Latency down to less than 1 millisecond
• Outputs: 3.5mm stereo headphone / line level output
• Inputs: 3.5mm stereo line level input
• Type: USB MIDI Device interface
• Power: DC Power Jack, 2.1mm centre positive