Trustscore 4.6

ADJ WR Controller (LED RC)

This product is currently not available for purchase

Key Features

  • Enables you to control RGB LED fixtures and various lighting effects for the ultimate show
  • Wireless operation gives you the freedom to control your lighting whilst moving around
  • Allows you to make atmospheric changes quickly and simply
  • Efficient layout simplifies use for a quick and uncomplicated set up

ADJ WR Controller (LED RC) Overview

Easily switch between different atmospheres and scenes with the touch of a button. With LED control over red, green, and blue colours, ADJ's WR Controller (LED RC) allows you to take advantage of your lighting fixture's colour mixing capabilities. Wireless, it offers a simple and effective interface, letting you focus on your performance.

For any task, complex or simple, the WR Controller will provide hassle-free operation. Control is also available for sound sensitivity and program speed with just a simple click, allowing the most efficient control over your performance whilst using minimal controllers. And with the ability to operate lights up to 15ft (4.5m) away, it's perfect for smaller venues with less lighting. You have the freedom to let your creativity run wild with the WR Controller.

Product Ref: 80443

Full Description

View Full Description

Features

  • Includes Red, Green, and Blue LED control
  • Wireless infrared remote control up to 15 ft/45M
  • Efficient control layout

Specifications

  • Blackout: Pressing this button will blackout the fixture.
  • Auto run: This button will run an automatic program. You can control the speed of the Auto Run by pressing the SPEED button first and then pressing the “+” and “-” buttons.
  • Program Selection: This button will let you access one of the seven static color selections. Pressing this button and then press the “+” or “-” to navigate through the seven programs.
  • Flash: This button will activate the strobe effect. You can control the flash rate by pressing the “+” and “-” buttons. Press this button again to exit strobe mode.
  • Speed: Press this button and use the “+” & “-” buttons to adjust the speed of the Auto run.
  • DMX Mode: This button will let you select which DMX mode you want to use. Some fixtures will come with different DMX channel modes. This button will switch between the different modes. Please see your corresponding fixture in this user manual to find out about your DMX modes, values, and traits.
  • Sound Active: This button activates sound active mode. Sound active mode will not work for outdoor LED lights.
  • Slave: This designates the fixture as a slave fixture in a master/slave configuration.
  • Set Address: Press this button to set the DMX address. Press this button first, then press the numbers to set the address. Example: DMX Address 1 Press “S001” DMX Address 245 Press “S245”
  • RGG: Press either one of these buttons, and then press the “+” and “-” to adjust the brighness.
  • “+” and “-”: Use these buttons to adjust the flash rate, speed of the Auto Run, dimming, and program selection.

Compatible Products

  • Mega Tri BAR
  • Mega Tri60
  • Mega Tri64 Profile
  • Mega TriPAR Profile
  • Mega PAR Profile
  • Mega BAR LED RC
  • Mega BAR 50 RGB RC
  • Flat PAR TRI18XS
  • Flat PAR TRI18X
  • Flat PAR TRI18
  • Flat PAR TRI7XS
  • Flat PAR TRI7X
  • Flat PAR TRI7
  • PRO 64B LED RC
  • PRO 38B LED RC
  • Mega Go Par64
  • Mega Go Bar 50
  • Jelly PAR Profile
  • SP4 LED
  • LED Pixel 10C
  • Pixel Kling 10C
  • LED Pixel 4C
  • Jelly GO PAR64
  • Tribar Spot

| Reviews of our service

Showing our latest reviews
View all
×
Oops! There was an error retrieving our TrustPilot reviews. Please, try again later.