Behringer CX3400 V2 Super-X Pro Crossover - Nearly New

Full Description

Get the most out of your system

You want your sound system to perform at its best. You want powerful, balanced sound with efficient operation. And with the Behringer CX3400 V2, that's exactly what you can achieve. State-of-the-art circuitry and premium components work in harmony to give you outstanding performance for any application. Ultra-low-noise op amps ensure that your signal remains pristine, whilst balanced connectivity allows you to hook up your system with ease.

The CX3400 V2 lets you optimise your system so that your loudspeakers can reproduce every detail of your sound with absolute precision. This high-performance device handles the task of dividing the frequency content and more between each of your loudspeakers and system components, keeping your sound clean and clear without letting certain frequencies get lost or overwhelmed.

You can operate the CX3400 V2 in one of three modes. 2-way stereo is ideal for optimising configurations with left and right lows and highs (woofers and tweeters). 3-way stereo handles left and right lows, mids, and highs. And 4-way mono is ideal for optimising lows, low-mids, high-mids, and highs. The device's front panel LED matrix allows you to see which mode you're using at any time, as well as any active controls.

But that's not all that this handy unit can do. The CX3400 V2 is packed full of features and tools for professional sound optimisation. You can compensate for constant-directivity horns with a switchable pre-EQ that ensures a flat frequency response by raising the signal gain by 3dB at 3.5kHz. This then increases by 6dB/octave up to 22.5kHz. You can also switch to Mono Bass mode at the touch of a button, and this sums the left and right channels together and routes them to the channel 1 low output. This lets you drive you active subwoofers, passive sub power amps, or lighting controllers in mono.

Features

• Professional stereo 2-way/3-way/mono 4-way crossover with state-of-the-art Linkwitz-Riley 24dB/octave filters
• Individual limiters on each output for optimal loudspeaker protection
• Adjustable time delay for phase alignment between drivers
• CD horn equalisation for constant directivity horn compensation
• Absolutely flat summed amplitude response, zero phase difference
• Low Sum function provides mono output for subwoofer operation
• Individual output gain controls for all bands
• Individual output mute switches for easy band adjustment
• Individual phase reverse switches for instant phase correction
• Switchable 25Hz low cut filter on each input for low-frequency driver protection
• Servo-balanced and gold-plated XLR connectors for all inputs and outputs
• Ultra-high precision potentiometers for ultimate accuracy and repeatability
• Illuminated switches for secure operation in dark stage environments
• Internal switch-mode power supply (100-240V) for noise-free audio and low power consumption
• Covered by Behringer's 3-year warranty program
• Designed and engineered in Germany

Specifications

• Audio Inputs Type: XLR, HF-filtered, electronically servo-balanced
  • Impedance: Greater than 50k Ohms balanced, Greater than 25k Ohms unbalanced
  • Maximum Input Level: +22dBu, balanced or unbalanced
  • CMRR: Typically greater than 60dB at 1kHz
• Audio Outputs Type: XLR, HF-filtered, electronically servo-balanced
  • Impedance: 100 Ohms balanced or unbalanced
  • Maximum Output Level: +21dBu, balanced or unbalanced
• Bandwidth: 20Hz to 20kHz, +0/-0.8dB
• Frequency Response: Less than 10Hz to greater than 55kHz, +0/-3dB
• Signal-to-Noise: +4dBu, 20Hz to 20kHz, unweighted
• Dynamic Range:
• Low Output: Greater than 94dBu (stereo mode), Greater than 94dBu (mono mode)
• Low-Mid Output: N/A (stereo mode), Greater than 98dBu (mono mode)
• Mid Output: Greater than 98dBu (stereo mode), N/A (mono mode)
• High-Mid Output: N/A (stereo mode), Greater than 96dBu (mono mode)
• High Output: Greater than 94dBu (stereo mode), Greater than 94dBu (mono mode)
• THD and Noise: Less than 0.04-percent (Limiter OFF), Less than 0.5-percent (Limiter ON)
• Interchannel Crosstalk:
  • High to Low: Less than -95dBu
  • High to Mid: Less than -97dBu
  • Mid to Low: Less than -97dBu
  • High to High-Mid: Less than -96dBu
  • High-Mid to Low-Mid: Less than -97dBu
  • Low-Mid to Low: Less than -98dBu
• Filter Type: 24dB/oct, Linkwitz-Riley, state-variable
• Stereo Mode Xover Frequencies:
  • Low/High: 44Hz to 930Hz (X1), 440Hz to 9.3kHz (x10)
  • Low/Mid: 44Hz to 930Hz (X1), 440Hz to 9.3kHz (x10)
  • Mid/High: 440Hz to 9.3kHz (X1)
• Mono Mode Xover Frequencies:
  • Low/Low-Mid: 44Hz to 930Hz (X1), 440Hz to 9.3kHz (x10)
  • Low-Mid/High-Mid: 440Hz to 9.3kHz (X1)
  • High-Mid/High: 440Hz to 9.3kHz (X1)
• Front Panel Switches:
  • Low Cut: Activated 25Hz, 12dB/octave HPF, Butterworth
  • Mute: Mutes the individual output
  • Phase Invert: Inverts the phase at the individual output
  • CD Horn: Corrects CD horn frequency response above 3.5kHz
  • Limiter: Activates the limiter function for all outputs
• Rear Panel Switches:
  • Xover Frequency: Multiplies the crossover frequency range by 10
  • Mode: Selects stereo/mono and 2/3/4-way operation
  • LF Sum: Selects normal stereo or mono-summed LF operation (ON = channel 1 +6dB louder, Channel 2 the same as before)
• Controls:
  • Input: Controls the input gain (+/-12dB)
  • Xover Frequency: Controls the crossover frequency
  • Delay: Controls the delay at the low output (0 to 2msec.)
  • Gain: Controls the output gain (+/-6dB)
  • Threshold: Controls the threshold of the limiter (-6dB to OFF)
• Power Supply: Autorange, 100-240V, 50/60Hz
• Power Consumption: 15W
• Power Connector: Standard IEC receptacle
• Dimensions: 44mm x 483mm x 147mm / 1.7'' x 19'' x 5.8'' (H x W x D)
• Weight: 1.7kg / 3.7lbs
• Product Code: CX3400 V2