Key Features
- Dual 15'' drivers deliver powerful full-range audio from 49Hz - 20kHz
- Unique topology maximises LF output and minimises interference
- DMT technology - maximum coverage with minimal wasted dispersion
- Rugged 15mm plywood cabinet with tour-grade textured paint finish
- Take advantage of QSC's advanced DSP with a full E Series system
DISC QSC E Series E215 Dual 15'' Passive PA Speaker Overview
A 1000W (RMS) power capacity, twin 15'' die-cast aluminium frame woofers and a frequency-shading topology deliver powerful full-range sound down to 49Hz with minimal interference. The rugged trapezoidal plywood enclosure is built to endure the rigors of the road and performance environments. When high-power and an extended low-end are needed from a single full-range speaker, the E215 should be at the top of your list.
The E215 features a nominal impedance of 4 Ohms, allowing you to drive your speaker with ease. Plus, when combined with a GXD/PLD power amp or TouchMix digital mixer, you can take advantage of a complete E Series Entertainment System with advanced DSP.
Product Ref: 123464
Full Description
View Full DescriptionE-Series Entertainment System
Each of QSC's E Series loudspeakers and subwoofers are designed to deliver incredible sound with any pro-grade power amp. However, if you take advantage of a complete E Series Entertainment System, you gain access to a whole new world of performance capabilities and options.
Use your E Series passive loudspeaker in combination with a QSC GXD or PLD power amp, or a QSC TouchMix digital mixer, and you can make full use of QSC's advanced DSP technology. E Series DSP settings have been meticulously designed for all three platforms. These support a broad range of situations, including live sound reinforcement, stage monitoring, DJ systems, and karaoke.Legendary QSC build and reliability
QSC are renowned for their road-ready construction. The E215 features a precision-made trapezoidal plywood enclosure with a powder-coated perforated steel grille. Rugged tour-grade textured paint keeps your cabinet looking great night after night. Built to deliver outstanding performance for portable and permanent applications, the E215 and its ultra-robust architecture ensures professional and reliable sound at every single show.
Directivity matched transition
One of the most unique features of the QSC E215 passive speaker is the innovative DMT (Directivity Matched Transition) technology. DMT was developed by QSC to ensure maximum coverage regardless of where you position the speaker. Producing 75° conical coverage, the E215 speaker minimises any wasted audio dispersion and prevents any 'muddy spots' that are often found in complex acoustic environments.
Features
- High-output 2 x 15'' passive loudspeaker with professional sound quality and 1000W (RMS) / 4000W (peak) power capacity
- Part of the QSC E Series Entertainment System - take advantage of advanced digital signal processing tunings and options using QSC's GXD and PLD amplifiers, or TouchMix digital mixers
- Titanium diaphragm ensures long life and high-fidelity audio
- M10 rigging points allow for permanent installation
- Road-ready construction with a rugged trapezoidal plywood enclosure, tour-grade textured painted finish, and a foam-lined perforated steel grille
- Rear panel provision for fitting optional 4'' casters (casters not included)
Specifications
- Configuration: 2 x 15'', 2-way, non-powered
- Frequency Range:
- -6dB: 49Hz - 20kHz
- -10dB: 39Hz - 20kHz
- Power Capacity:
- Continuous: 1000W
- Peak: 4000W
- Sensitivity: 98dB, 1W at 1m
- Coverage Angle: 75° conical DMT
- Output: 134dB (peak SPL at 1m)
- Drivers:
- LF: 2 x 381mm (15'') drivers with 89mm (3.5'') voice coils
- HF: 38mm (1.5'') exit, 71mm (2.8'') voice coil, compression driver
- Nominal Impedance: 4 Ohms
- Crossover: Full-range only, 1.8kHz
- Input Connectors:
- 2 x NL4
- 1 x barrier strip
- Enclosure:
- Shape: Trapezoidal
- Material: Plywood
- Finish: Black texture paint
- Handles: 2 x side-mounted
- Grille: Perforated powder-coated steel grille with foam lining
- Mounting and Suspension: 9 x M10 suspension points
- Dimensions: 16.5'' x 44.3'' x 18.3'' / 420mm x 1125mm x 464mm (W x H x D)
- Weight: 49.1kg / 108lbs
| Reviews of our service
View all
