IK Multimedia iRig Pro DUO I/O Interface for iOS, Android, PC and Mac

Full Description

Recording capabilities

Two analog combo inputs (1/4”-XLR) are provided for connecting to the iRig Pro DUO I/O. These can be used to simultaneously record any combination of dynamic or condenser microphones and instruments. These take advantage of Class-A preamps, adjustable gain and 48V phantom power. Each channel has independent gain control that allows a range of sources to be recorded into the iRig Pro DUO I/O.

Multiple connectivity options

The iRig Pro DUO I/O can also be used as a MIDI interface via MIDI input and output connectors and the included breakout cables. Additional connections include two balanced ¼” outputs and a headphone output. A direct monitor switch provides latency-free monitoring of direct input signal. This is ideal when recording into streaming apps, or to monitor the processed signal returning from their device when recording music.

Get started immediately

The iRig Pro DUO I/O runs on USB bus power or 2 AA batteries, which gives you access to high-quality recordings on location. USB-A and USB-C cables are provided to work with any device right out the box. The iRig Pro DUO I/O is compatible with any app designed for high-quality digital audio input. The iRig Pro DUO I/O also comes with access to over £300’s worth of IK software, apps, and in-app material.

Features

• 2-channel audio/MIDI interface
• Two analog combo inputs (1/4” / XLR)
• Adjustable gain and 48V phantom power
• USB bus power or 2 AA batteries (PSU input provided)
• Free access to over £300 of IK software, apps, and in-app material

Specifications

• Microphone input:
  • Microphone Input: 2x balanced, XLR. Pin 2: hot / Pin 3: cold / Pin 1: ground
  • Microphone Input Level: from 6 mVpp to 1.4 Vpp
  • Microphone Input Impedance: approx 2 kOhms
  • Gain Range: 48 dB
  • Phantom Power: +48V ± 4V
  • Frequency Response:from 5 Hz to 21 kHz (-3dB) Gain @ min, from 30 Hz to 21 kHz (-3dB) Gain @ max
  • Input Noise: -103 dB(A) Gain @ min, -86 dB(A) Gain @ max
• Instrument Input:
  • Instrument Input: 2x unbalanced, Hi-Z, TS 1/4” Jack, Tip: signal / Shield: ground
  • Instrument Input Level: from 30 mVpp to 6.9 Vpp
  • Instrument Input Impedance: 1 MOhms
  • Gain Range: 27 dB
  • Frequency Response: from 2 Hz to 21 kHz (-3dB) Gain @ min, from 5 Hz to 21 kHz (-3dB) Gain @ max
  • Input Noise: -104 dB(A) Gain @ min, -102 dB(A) Gain @ max
• Line Output:
  • Line Outputs: 2x balanced, TRS 1/4” Jack, Tip: hot / Ring: cold / Shield: ground
  • Floating Balanced Outputs: automatic level compensation when working in unbalanced mode
  • Maximum Output Level: +16 dBu into 600 Ohms balanced load
  • Frequency Response: from 10 Hz to 21 kHz (-3dB)
  • Output Dynamic Range: 106 dB(A)
  • Output Impedance: 150 Ohms balanced
• Common:
  • AD and DA Resolution: 24-bit
  • Sampling Rate: 44.1 kHz and 48 kHz
  • Power: USB bus power, battery power (2xAA - included), or DC power supply (9VDC, from 500mA up, positive outside - not included)
  • Metering: Multicolor LED
  • Size: 75mm x 127mm x 37mm
  • Weight: 197.2g (batteries excluded)
  • Battery Life:
    • Recording - Max load*: 3 hours, 30 minutes (NiMH rechargeable); 45 minutes (Alkaline)
    • Playback - Min load**: 10 hours (NiMH rechargeable); 3 hours (Alkaline)
  • Product code: IP-IRIG-PRODUOIO-IN