Key Features
- Pristine sound for your multimedia applications
- Zero distortion and no unwanted noise from built-in transformer isolation
- Quickly reduce input sensitivity with the -15dB pad switch
- Connect to a wide range of equipment via 1/4", TRS, and RCA inputs
Radial ProAV1 Multimedia Passive DI Box Overview
Flawless sound for all your equipment. The Radial ProAV1 Multimedia Passive DI Box is an essential toolkit for all your multimedia needs. Whether you're on stage or in the studio, the ProAV1 automatically sums stereo sources to mono, preserving channels and simplifying your setup. Connecting your gear has never been easier.
No unwanted noise. Just great sound. The ProAV1 eliminates buzzing from ground loops, so you'll always get the clearest sound. And with a -15dB pad at hand, you'll never have to worry about distortion when plugging in your smartphones, laptops, CD players, and more.
Perfect for any setup. Thanks to its robust, compact construction, the ProAV1 can be introduced into the tightest of stage or studio spaces. Never worry about knocks and drops getting in the way of your performance. With its metal chassis, you're ready for any challenge.
Product Ref: 112869
Full Description
View Full DescriptionThe essential audio toolkit
Performance and practicality combined. At the heart of the ProAV1 is a custom-built transformer, delivering pristine sound with noise free operation and zero distortion. Connect to a wide range of multimedia devices. Thanks to 1/4” jack, RCA, TRS, and thru inputs onboard, it’s easy to plug in your smartphone, laptop, CD players, and other devices. And with a +4dB line level output on board, the ProAV1 is the perfect companion for consoles and recording interfaces. Whatever your setup, you’ll get a smooth, linear frequency response, and the clearest sound possible.
Features
- Compact multimedia direct box, perfect for AV integrators and reduced channel requirements
- Handles huge transients without distorting
- Ultra quiet passive design for virtually noise free operation
- Eliminate noisy ground loops with built-in transformer isolation and integrated lift switch
- Pristine signal from ¼” mono, 3.5mm TRS inputs, and Thru
- Connect to professional audio sources via XLR +4dB line input
- Feed directly to your mixer or mic preamp via balanced 600 ohm XLR output
- Easily reduce input sensitivity for basses and keyboards with the -15dB pad switch
- Hi-impedance thru will not load-down instrument tone
- High-quality powder coat keeps your DI looking great for years to come
- Ideal for smartphones, PCs, headphone jacks, and more
Specifications
- Audio Circuit Type: Passive, transformer-based
- Number of Channels: Single channel (mono)
- Frequency Response: 20Hz - 18.5kHz (+/-0.2dB)
- Dynamic Range: 128dB
- Maximum Input: +18dB at 20Hz
- Total Harmonic Distortion: 0.01 from 20Hz to 20kHz at -10dB
- Phase Deviation: 1° at 100Hz, 8° at 20Hz
- CMR Ratio: 100dB at 60Hz
- Input Impedance: 140K Ohms, unbalanced
- Output Impedance: 150 Ohms, balanced
- Transformer: Eclipse ET-D82, 12:1 ratio
- Shield: Faraday, MuMetal can
- Input Pad: -15dB
- Merge: Sums left and right to mono
- 180° Polarity Reverse: Inverts absolute phase
- Ground Lift: Disconnects pin-1 at XLR output
- XLR Configuration: AES standard (pin-2 hot)
- Connectors:
- In & Thru:
- 1/4''
- RCA
- 3.5mm
- In: XLR-F
- Out: XLR-M
- In & Thru:
- Construction: 14-gauge steel chassis and shell
- Finish: Durable powder coat
- Size (W x H x D): 3.25'' x 5'' x 1.875''
- Weight: 0.73kg / 1.6lbs
- Power: Passive, no power required
- Conditions: For use in dry locations only, between 5°C and 40°C
| Reviews of our service
View all
