Tascam ML-4D/OUT-X - Four Channel Dante Converter With DSP Mixer, XLR

Full Description

High quality Dante converter

Dante is a specialised system that combines software, hardware, and network protocols to transport high-quality digital audio, and act as a power source for compatible devices. This streamlines your cable requirements to Ethernet only, allowing your equipment to stay tangle and clutter free. With a design centred around premium circuitry and a powerful DSP processor, the ML-4D works flawlessly and without latency.

To convert the audio from your Dante network to your analog audio equipment, the Tascam ML-4D/OUT X is the perfect tool. Featuring four analog balanced line XLR outputs as well as both Data and Data + PoE connectors, the ML-4D converts Dante input signals out to the four XLR line outputs, and thanks to its extensive data connection it also supports four Dante channels that allow you to send digital files to any other device within an established Dante network.

Easy to set up and use

The ML-4D is extensively customisable, with intricate digital control. You can wirelessly control the ML-4D with a Windows or MAC PC, Android or IOS with two different software applications. Tascam MX Connect allows you to configure and finetune the internal mixer and the routing matrix, which can be bypassed. Tascam EZ Connect allows the end user to easily adjust volume, change scenes, and wield basic control over the inputs and outputs without changing the in-depth pre-sets of the digital mix bus. Scene pre-sets can be saved and automated with the SNTP client function.

Integrating the ML-4D into your existing setup is easy, you can attach it to furniture with included mounting brackets, discretely integrating it into your workspace. Part of the Tascam Dante Compact Processor Series, the ML-4D can be daisy chained via the extra data connector, it can also be combined with another compact processor to be fitted as a 1U 19-inch rackmount, using the purpose made AK-RS1 rackmount shelf. Primarily powered over ethernet (PoE), the Tascam ML-4D can also be powered by an optional (not Included) 12-volt AC adapter, this adapter is powerful enough to supply two Tascam compact processors connected to each other via ethernet, ideal for two units combined in the rackmount configuration. For any installation, the Tascam ML-4D/OUT-X is the ideal Dante to analog converter, with its compact size, powerful processing capabilities and intricate customisation ability. An essential item for any system running on Dante.

Features

• Compact Dante to analog converter with powerful DSP processing ability
• provides latency free digital audio transmission across a Dante network
• Integrates seamlessly with other Tascam Dante Compact Processor Series models
• Four analog balanced male XLR outputs
• Each analog input features high quality microphone preamps with a natural sonic signature
• Power over Ethernet and additional data connection for ultimate network integration
• Controlled via Tascam MX Connect for configuration and EZ connect for end user control
• Can be wirelessly controlled via Windows, MAC, IOS or Android device
• Powered by PoE or a 12V AC adapter that can power two linked compact processors

Specifications

• Number of channels and formats 4 channels, 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 16/24 bit

• Analogue outputs (ANALOG OUT):
  • ML-4D/OUT-X: XLR connectors (XLR-3-31, 1: GND, 2: HOT, 3: COLD)
  • Nominal output level:
    • +4 dBu (Ref(D) ≠ –9 dBFS)
    • +6 dBu (Ref(D) = −9 dBFS)
  • Maximum output level(selectable):
    • +15 dBu (Ref(D): –9 dBFS)
    • +18 dBu (Ref(D): –14 dBFS)
    • +20 dBu (Ref(D): –16 dBFS)
    • +22 dBu (Ref(D): –18 dBFS)
    • +24 dBu (Ref(D): –20 dBFS)
  • Onput impedance: <200 k?

Note: 0 dBu equals 0.775 Vrms

• Dante/Ethernet connectors (DATA/DATA+PoE): RJ-45
  • Transmission protocol: Dante
  • Gigabit Ethernet standard: 1000BASE-T (IEEE 802.3ab)
  • Cable requirements: Cat 5e or better STP cables
• Output level control (10V/CONTROL/GND, ML-4D/OUT-E only): Balanced Euroblock connectors, 3.81 mm pitch. Connect a variable resistor here (10 kΩ recommended)

• Dante input to line output:
  • Frequency response:
    • 20 Hz – 20 kHz, ±0.5 (sampling frequency 44,1/48 kHz, JEITA)
    • 20 Hz – 40 kHz, ±0.5 (sampling frequency 88,2/96 kHz, JEITA)
  • Distortion (THD+N): <0.005 (−1 dBFS input, 44.1/48/88.2/96 kHz sampling frequency, JEITA)
  • S/N ratio: >108 dB (44.1/48/88.2/96 kHz sampling frequency, JEITA)
  • Crosstalk: >100 dB (44.1/48/88.2/96 kHz sampling frequency, JEITA)
  • Dynamic range: >108 dB (44.1/48/88.2/96 kHz sampling frequency, JEITA)

    Note: JEITA indicates compliance with JEITA CP-2150

• Power supply:
  • PoE class 0 (power over Ethernet)
  • Tascam PS-P1220E AC adapter (sold separately)
• Permissible operating temperature range: 0–40 ºC
• Power consumption: 7.5 W
• Dimensions (W × H × D): 214 mm × 45 mm × 136 mm (including protrusions)
• Weight: 885 g
• Product code: ML-4D-OUT-X