This product is currently unavailable for delivery to your country
Key Features
- Deliver a booming bass tone with 200W of power
- Perfect sonic balance using Tilt Seesaw EQ
- Personalised sound through FX loop function
- Compact and portable due to lightweight construction
Laney DB200H Digbeth 200W Bass Head Overview
The Laney Digbeth DB200H is the new standard of bass amplification. Modern functionality is paired with vintage expectations creating an amp that is powerful and compact. The DB200H comes packed with a multitude of features that ensure a clear tone, wide dynamic range, and one powerful punch, which is ready to blow the crowds away.
Sculpt your sound with the TILT EQ function. You can elevate the high end, providing your bass with presence, or bring out the bass, making the bottom end boom. With an FX loop to keep your effects clear, this amp is built to help you create your perfect performance. It is already a modern classic.
Product Ref: 181097
Full Description
View Full DescriptionA selection of tones
Complete tonal freedom. Packing 200 Watts RMS power, this amp will emit your basslines at an earth-shattering amplitude. But when it comes to your performance it’s about a lot more than volume. The Laney Digbeth DB200H Bass Head is packed full of features to enhance your sound. Featuring both a FET & Tube channel, you can change between the two tones at the flick of a switch. These two channels can also be blended, pulling out the tube volume dial letting you season the FET tone with a bit of grit and distortion.
The tonal exploration doesn’t stop there. The Tilt Seesaw EQ can be used to create the perfect sound for your performance. Turning the Tilt dial towards the treble clef boosts the higher frequencies, whilst dampening the lower end, giving the tone a cutting edge so you can cut through a live sound. Alternatively, you can use the Tilt EQ to boost the Low frequencies generating a thick, round tone. This is all topped off with a mid-level dial, so you have full control of the mid-range.
Stay connected
Connecting your devices has never been easier than it is with the Laney Digbeth DB200H. In addition to the traditional 1/4-inch input jack, there are a multitude of other connectivity options. An FX loop, located on the back of the head, allows you to add effects in between the pre-amp and the output. So, you can experience delayed distortion, as opposed to distorted delay.
Practise with simplicity and record with ease. A designated XLR-DI output allows you to connect the amplifier to a PA system or recording interface, without needing to mic up the amp. This is partnered with a ground lift switch, removing any unwanted hum in the mix. When it comes to practicing a 3.5mm stereo aux in and 3.5mm phones out, allows you to jam along to your favourite tunes, whilst avoiding any noise complaints.
Specifications
- Product: BASS Amplifier
- Power: 200 Watts RMS
- Channels: FET & TUBE
- Unit Size/mm: 180x300x207 (HxWxD)
- Unit Weight: 4.1 Kg
- Carton Size/mm: 235x470x300 (HxWxD)
- Packed Weight: 6.5 Kg
- Mains Voltage: 100-240V Universal power supply
- Power Consumption: 75W
- Product Code: DB200H:U:DL
Your order may contain items that use a 240V UK plug or a 220V EU plug
Any electrical items in your order may have been designed to work with a 240V circuit, using a United Kingdom G type plug connection or a 220V circuit, using an EU plug connection. An adapter or transformer may be required for these items to work properly and safely in your country. Some items work with a range of voltages, or have a switchable voltage control built in. Please refer to the specific product details for further information.
| Reviews of our service
View all