Neumann MA 1 Monitor Alignment Kit with KH 750 DSP Subwoofer

Full Description

Neumann MA 1 Monitor Alignment

Studio sound made easy

No special drivers. No additional plug-ins. All alignment data is stored directly into your DSP-powered monitors. Adjust phase and amplitude with the software. You don't need special acoustic knowledge to get great results. This kit does the hard work for you.

Neumann KH 750 DSP Active Studio Subwoofer

Everything you need, right at your fingertips

Thanks to the Neumann.Control app, speaker set-up has never been easier. Through IP networking you can easily identify speakers in the same room, easily assigning them to individual positions, connected and controlled directly from your tablet or smartphone. With Neumann’s Guided Alignment you can achieve optimised speaker arrangements, tailor-made to your surroundings. For expert users, Neumann.Control offers Manual Alignment. With an 8-band parametric EQ, speaker levels and delays can be adjusted to ensure you always get the sound you need. Take complete control of your arrangement with adjustable operation parameters. From volume, preset levels, mutes, groups, solos, and more. Your sound, your way, all from the palm of your hand.

What’s in the box

• 1 x MA 1 Microphone
• 1 x Neumann KH 750 DSP Active Studio Subwoofer
• 1 x Microphone clamp
• 1 x Quick guide
• 1 x Safety guide
• Software is downloadable

Features

Neumann MA 1 Monitor Alignment

• Exceptional acoustic results for stereo home and professional studio setups
• Highest accuracy for tonality and impulse reproduction
• Purpose built for stereo pairs of Neumann studio monitors
• Correct your room with ease thanks to advanced calibration algorithms
• Developed by the world’s leading institute for audio signal processing (IIS) for the best monitor quality possible
• Easy to use software, compatible with both Mac and PC
• No plug-in or special audio drivers required – everything is stored in the DSP-powered monitors for ease of use
• Optimised amplitude response and phase thanks to dedicated software
• Comes fully equipped with an individually calibrated measurement microphone

Neumann KH 750 DSP Active Studio Subwoofer

• Perfect for extending your KH 810, KH 870, and KH 805 subwoofer systems
• Combats standing waves with an ultra-stiff wooden cabinet design
• Huge bass from a compact enclosure
• Deep, articulate bottom end from long-throw bass driver
• Low harmonic distortion for ultra-precise sound reproduction
• Flexible operation via 2.0/0.1 bass management
• Tailor your subwoofer to the correct application with four routing modes (stereo 80 Hz bass management, external bass management, LFE up to 120 Hz, LFE full range)
• Pristine signal integrity from electronically balanced analogue XLR inputs and outputs
• Wide range input gain and output level controls
• Total control of your sound with 8-position phase control, continuous low-cut control and parametric equaliser
• Versatile switch mode power supply for universal use
• Eliminate ground loop noise with the dedicated lift switch
• Low heat dissipation amplifiers with large headroom and sophisticated protection circuitry
• Separate thermo limiter to protect the voice coil and power amplifier
• Connect to your existing network infrastructure with the network connector using standard IP protocol
• User friendly back panel gives full, easy access to speaker controls and connections
• Standby function reduces power consumption when not in use

Specifications

Neumann MA 1 Monitor Alignment

• Acoustical operating principle: Pressure transducer
• Directional pattern: Omnidirectional
• Frequency range: 20Hz – 20kHz
• Sensitivity at 1kHz into 1 kohm: 30 mV/Pa -30dBv +/- 3dB uncalibrated | 30 mV/Pa -30dBv +/- 0.5dB calibrated (via software)
• Rated impedance: 50 ohms
• Rated load impedance: 1000 ohms
• Equivalent noise level, CCIR: 39dB
• Equivalent noise level, A-weighted: 27 Db-A
• Maximum SPL for THD 0.5 : 132dB
• Signal-to-noise ratio, CCIR (re. 94 dB SPL): 55dB
• Signal-to-noise ratio, A-weighted (re. 94 dB SPL): 67 dB
• Maximum output voltage: 10dBu
• Supply voltage (P48, IEC 61938): 48V +/- 4V
• Current consumption (P48, IEC 61938): 3 mA
• Matching connector: XLR3F
• Weight: 37g
• Diameter: 23mm
• Length: 117mm

Neumann KH 750 DSP Active Studio Subwoofer

• Free Field Frequency Response ±6 dB: 16 – 800 Hz
• Free Field Frequency Response ±3 dB: 18 – 750 Hz
• Sine Wave Output with a THD 95 dB SPL (>70 Hz)
• Bass capability: Max. SPL in half space at 3 THD at 1m (averaged between 50 Hz and 100 Hz): 105.0 dB SPL
• Self-generated noise at 10 cm (with input gain set to 100 dB SPL for 0 dBu):
• Controller Design: Digital; active
• Crossover Frequency: 80 Hz fixed or 60 – 100 Hz via Neumann.Control
• Crossover Slope: 24 dB/oct; 4th order
• Equalisation (Low-cut): 30 Hz; 0 – -12 dB
• Phase: 0; 45; 90; 135 and 0/180 deg
• Equalisation (via Neumann.Control Software): 8 x full parametic IIR + low/high shelf global balance
• FIR Phase Correction: For connected analogue loudspeakers: Linear phase (170 Hz – 16 kHz; +/- 45°)
• Latency: 1.5 ms (A-D-A); 1.2 ms (D-A)
• Delay (User-adjustable Delay Range): 0 – 100 ms and 2 x 0 – 20.8 ms
• Output Power Woofer Amplifier (THD+N with Limiter Deactivated 10 ): 256 W
• Volume Control Range; Resolution (via Neumann.Control): 0 – -∞ dB; 0.1 dB
• Signal Routing Modes: Right; External Bass Management; 2 x LFE
• Input Gain Control (Sensitivity): +2 – -12 dB
• Output Level Control (Output Level at 1 m Based on 0 dBu Input Level): 94; 100; 108; 114 dB SPL
• Analogue Inputs: 2 x XLR: analogue electronically balanced
• Analogue Outputs: 2 x XLR; analogue electronically balanced
• Analogue Input Impedance: >13 kΩ
• Max. Input Level:
• CMRR: >56 dB @ 15 kHz
• Crosstalk (1 kHz), Level Matching:
• Analogue Dynamic Range; THD+N: 119 dB(A);
• Digital Inputs: BNC (75 Ω): AES3; S/P-DIF
• Digital Outputs: BNC (75 Ω): AES3
• A/D Converter:
  • Resolution; Design: 16 – 24-bit DAC; Δ∑
  • Sampling Rate: 22.05; 24; 32; 44.1; 48; 64; 88.2; 96; 176.4; 192 kHz
• Dynamic Range A-D-A: >120 dB(A)
• Dynamic Range D-A: >123 dB(A)
• Mains Power Supply (Input Voltage; Frequency): 100 – 240 V ; 50/60 Hz
• Power Consumption (Standby / Idle / Full Output):
• Standby: Disabled; 90 mins (default); user defined in software
• Drivers, Magnetically Shielded (Woofer): 265 mm (10”)
• Cabinet Surface Finish, Colour (Custom): Painted, Metallic Anthracite (RAL 7021)
• Baffle Cover: Included metal grille
• Dimensions: 383 x 330 x 383 mm
• Weight: 19.5 kg
• Product code: MA1-KH750